AC Adapter » 3. Final Assembly

Required Tools

Required Parts

Image	Part
	AC Adapter

1. Connect the battery power connector created in step 2 to the coax cable created in step 1.


2. Ensure that the AC Adapter is not plugged in. Connect the male and female coax connectors together.


3. If a Qwerk is available, test the adapter by plugging the end of the battery power connector into the Qwerk, plugging the AC Adapter into an electrical outlet, and turning on the Qwerk. If the power light does not come on, turn the Qwerk off and review the steps taken to ensure that polarity was not reversed.

Return to Overview