Flower » 1. Power and Testing

Required Tools

Image	Tool
	Pliers
	Wire Strippers

Required Parts

Image	Part
	Power Cable (Qwerk 1.2)
	Qwerk Power Connector Housing (Qwerk 1.1 only)
	Qwerk Power Connector Crimps (Qwerk 1.1 only)
	Male Kyosho Battery Connector (Qwerk 1.1 only)
	Female Battery Connector
	Female Coax Cable
	Wire Nuts (x2)
	AC Power Adapter (12V, 5A)
	Qwerk Board
	HS-81 Servo (x6)
	HS-422 Servo

Follow the AC Adapter recipe to make the AC adapter. Use the 5-amp AC power adapter rather than the 1.5-amp adapter.

1. Turn off the Qwerk.


2. Plug the AC power adapter into the Qwerk.


3. Locate the row of pins labeled RC SERVOS and plug the seven servo wires into the ports. Align the black wire with ground (-), the red wire with power (+), and the yellow wire with signal (S). Begin with Port 0.


4. Follow the First Steps to test the servos and the Qwerk.


5. Unplug the servos after you have tested them.

Return to Overview | Proceed to Step 2