Flower » 9. Springs

Required Tools

Image	Tool
	Wire Cutters

Required Parts

Image	Part
	Springs (x2)
	Zip Ties

1. Attach two zip ties together and string two springs onto one of the zip ties.


2. Wrap the zip ties around the L brackets that connect Servos 4 and 5 to the hexagon.


3. Allow the springs to hang under the L bracket that connects the hexagon to the 3” aluminum tubing.


4. Tighten the zip ties around Servos 4 and 5 just enough for the zip ties to remain attached to each other.


5. Pull one spring down and connect it with a zip tie to the hole at the top of the servo bracket at the stem joint. Pull the other spring down and connect it with a zip tie to the other hole. The flower should still be able to bend, but the springs should make it easier for the flower to straighten again.

Return to Step 8 | Proceed to Step 10