Qwerkbot » 4. Qwerk Disassembly

Required Tools

Image	Tool
	Phillips Screwdriver

Required Parts

1. Using a #1 Phillips screwdriver, remove all four screws from the top plate of the enclosure. Place the screws in a small bowl to prevent them from scattering all over the work area.


2. Lift the top plate of the enclosure off of the Qwerk, exposing the board.


3. Grasping the Qwerk board by the two 16 port blue connectors, gently tilt the board slightly up and then slide in the direction of the USB connector. Once the board is no longer secured by the enclosure tabs, lift the board completely out of the enclosure, and put it aside.

Return to Overview | Proceed to Step 5