Qwerkbot » 8. Qwerk Reassembly

Required Tools

Image	Tool
	Phillips Screwdriver

Required Parts

Image	Part
	Logitech Webcam

1. Holding the Qwerk board by the blue connectors, slide the Qwerk board back into the bottom half of the enclosure. The USB port should be on the side away from the wheels. Be sure that the lower circuit board fits into the enclosure tabs.


2. Remove the battery pack from the top half of the enclosure by bending the logitech camera mount up and lifting the battery vertically so that it clears the retaining bars. Place the top half of the enclosure on top of the board. Affix the two enclosure plates together with the four enclosure screws you removed in step 4.1.


3. Replace the battery pack and place the Logitech camera onto the camera mount.

Return to Overview | Proceed to Step 9